Instructions for Use, Disclaimer, etc.

Bearing Technical Calculation Tool

For the products described in the “Rolling Bearing General Catalog (CAT.2203/J)” published by NTN Corporation (“the Company”), the following technical calculations are available:

You are requested to always read the following instructions and conditions before using the Bearing Technical Calculation Tool.

You can use the Bearing Technical Calculation Tool only if you have agreed to all of the following instructions and conditions.

<General Instructions>

  1. Technical calculations (formulas) which can be confirmed by the Bearing Technical Calculation Tool are in conformity with the “Rolling Bearing General Catalog (CAT.2203/J)” published by the Company.
  2. Technical calculation results which can be confirmed by the Bearing Technical Calculation Tool must be treated as reference.
  3. Bearing life calculated by the Bearing Technical Calculation Tool is basic rating life.
  4. The definitions of the terms used in the Bearing Technical Calculation Tool are in conformity with JIS B 0104.
  5. As for other details, you are requested to refer to exclusive catalogs of the Company published separately.

<Instructions for Use>

  1. The Bearing Technical Calculation Tool and calculation results thereof (hereinafter, the term “calculation results” includes CAD drawings) can be used for a legitimate purpose of use of the Bearing Technical Calculation Tool and in accordance with the terms and conditions described in these instructions. A user of the Bearing Technical Calculation Tool may provide the information to a third party, only subject to the condition that the user thoroughly explains to such third party about the content of these instructions and that such third party agrees to the terms and conditions described in these instructions and disclaimers.
  2. Any downloading, reproduction, use, reprinting and adaptation of the Program is prohibited. If a user violates this prohibition, he/she must take necessary measures in accordance with instructions of the Company. In this case, if the Company suffers any damages, the Company may claim compensation for damages against the user.
  3. A user may not distribute (including publication and release on the Internet) the Bearing Technical Calculation Tool (including processed one) to multiple and unspecified persons
  4. There are cases where a user who accesses the site of the Bearing Technical Calculation Tool may link to sites operated by third parties other than the Company.

<Disclaimer>

  1. The Company pays careful attention to the production of the Bearing Technical Calculation Tool. However, the Company shall not warrant that the Tool is free from misprints or programming bugs or that the Tool is free from defects in that its practical use is different or is not fit for the purpose of use of a user; nor does it make any warranty whatsoever as to the correctness, usefulness, reliability, etc. of calculation results. Calculation results of the Bearing Technical Calculation Tool are reference samples prepared on the assumption of general cases, and any professional advice is not provided as to each individual case. If you are in need of professional advice, you are recommended to consult with the nearest sales office of the Company or contact us in the inquiry form below.
  2. If a user or a third party suffers damages due to the use of the Bearing Technical Calculation Tool or calculation results thereof, the Company shall not be liable for any such damages or disadvantages suffered by such users or third parties.
  3. The services provided on the Site may be suspended or completely discontinued due to a failure of communicating equipment, communication line or computer, or due to reasons of the Company, and the Company shall not be liable for any damages or disadvantages resulting from such suspension, discontinuation or termination of the services.
  4. The content of the Bearing Technical Calculation Tool may change without notice to adapt to technical progress or improvement, and the Company shall not be liable for any damages or disadvantages resulting from any such changes, etc.
  5. Although there are cases where a user who accesses the site of the Bearing Technical Calculation Tool may link to sites operated by third parties other than the Company, the Company shall not be liable for any use of such linked sites or any results thereof.

<Copyright and Other Intellectual Property Right>

  1. Copyrights and all other intellectual property rights to contents contained in the Site including the Bearing Technical Calculation Tool, and catalogs, etc. shall all belong to the Company, and any such right shall not be transferred to a user.

<Modification of Use Conditions>

  1. The Company may modify the use conditions of the Bearing Technical Calculation Tool without any prior notice. A user agrees in advance that there is such modification of the use conditions and agrees to observe such modified use conditions.

<Jurisdiction, etc.>

  1. Any dispute arising in connection with use of the Bearing Technical Calculation Tool shall be brought to the exclusive jurisdiction of the Osaka District Court in the first instance, and the governing law for settlement of such a dispute shall be the laws of Japan.

Operating Environment

The Program is a web application based on the utilization of the Internet. Use of the Program requires the following environment: